(Closed) Request For Proposal – GPSNR-RFP-A02-024-Pilot Agroforestry Workshops for Smallholders

Share This Post

1. Introduction

The Global Platform for Sustainable Natural Rubber (GPSNR) is an international multi-stakeholder, voluntary membership initiative seeking to lead improvements in the socioeconomic and environmental performance of the natural rubber value chain. Members of the platform include tire manufacturers, rubber producers and processors, vehicle makers, NGOs, and smallholder natural rubber producers. 

As of June 2022, GPSNR has 135 smallholder members from 10 countries. Smallholder members on the Platform have consistently advocated for the Platform to implement initiatives on agroforestry and were a catalyst for GPSNR’s commitment on agroforestry announced at COP26 in Glasgow[1].

To advance engagement with smallholders on agroforestry, GPSNR is seeking to hire a consultant to develop coaching materials on rubber agroforestry systems, and to conduct a pilot series of “Introduction to Agroforestry” workshops for smallholders in two to three countries in 2022.

Proposed programmes should be implemented in line with GPSNR environmental and social commitments and values, based on the GPSNR Policy Framework[2].


[1] GPSNR Announcement on Agroforestry: https://t.co/9aXbZeZpeS
[2]GPSNR Policy Framework: https://sustainablenaturalrubber.org/policy-framework/

2. Objectives and Deliverables     

Objectives

  1. To collate and prepare global, country, and region-specific peer-reviewed evidence and best-practice materials on agroforestry for natural rubber systems
    1. Content on environmental, economic feasibility of rubber agroforestry systems
    2. Where feasible, collated material to be disseminated to GPSNR smallholder members and their communities even where workshops are not planned for in 2022 
    3. Materials would be translated by GPSNR under a separate budget
  2. To conduct pilot workshops for GPSNR smallholder members and their communities, including active integration of women, youth, and minority representation, to introduce agroforestry concepts and practices, and provide guidance and answers for the following questions:
    1. What is possible to grow in your region or specific location, and how can this be achieved? Possible considerations include:
      1. Appropriate farm design
      2. Cultivation practices
      3. Cost estimation
    2. What is the market availability, demand, and potential economic/financial model and value chain of recommended crops, or of particular products, in your region?
    3. How can agroforestry investments benefit smallholders economically, environmentally, and socially? 

Deliverables

GPSNR has identified the following countries where materials, and workshops, should be prioritised in 2022:

  1. Cambodia: strong enthusiasm from smallholders, NGOs, and other partners to organise and kickstart agroforestry in the country, where little to none have been implemented at present 
  2. Indonesia: agroforestry possibilities and practices would vary widely across the country’s major rubber-producing regions; there is strong interest from smallholders as well; critical to blend or merge more traditional concepts such as jungle rubber with evidenced-based and structured forms of agroforestry
  3. Thailand: a well-organised and budding agroforestry movement is taking root especially in southern Thailand (termed “sustainable natural rubber” by smallholders and the Rubber Authority of Thailand); workshops could further provide a boost to smallholders in the region and country
  4. Next tier of countries: Cote d’Ivoire, Vietnam, Sri Lanka, Myanmar 

The consultant may propose other priority countries in their proposal and justify their choice of countries based on metrics of their own construction.

The proposal should include key details such as the following:

  • Methodology of content and curriculum development
  • Proposed teaching or coaching pedagogy and approach for the workshops
  • List of local partners or experts, if any, that could be engaged for the workshops
  • Target number of smallholders in each country

Future Plans

In addition to the pilot series of workshops in 2022 in at least two countries, the consultant should present an outline to consider how the series of pilot “Introduction to Agroforestry Workshops” can be expanded (in terms of countries, content, level of engagement etc.) beyond 2022.

3. TENDER EVALUATION FACTORS

GPSNR will rate proposals based on the following factors:

  1. Responsiveness to the requirements set forth in this Request for Proposal

  2. Relevant past performance/experience/accreditation of the bidder on agroforestry and agricultural production

  3. Samples of work (e.g., previous training or coaching programmes in target countries)

  4. Technical expertise/experience of bidder and bidder’s staff

  5. Proposed timeline of operations

GPSNR reserves the right to award to the bidder that presents the best value to GPSNR as determined solely by GPSNR in its absolute discretion.

4. Expected Timelines

The work shall begin by July 2022 and the various phases shall be completed in accordance with the approximate timeline below:
ActivityDue Date
RFP publication3 June 2022
Submission deadline for proposals1 July 2022
Contract Award8 July 2022
First Workshops ConductedSeptember 2022
Second Workshops ConductedOctober 2022
If Proposed: Third Workshops ConductedNovember 2022
Final Review and Project ConclusionDecember 2022

Consultants should detail a project timeline with milestones that are approximately in line with the above timeline.

Consultants will also provide fortnightly or monthly progress updates to the GPSNR Capacity Working Group, or on an as-needed basis.

5. Budget

The Platform is anticipating that the total budget of no more than 35,000 EUR be allocated to the project. The approximate expected breakdown for each Stage is as such:

Bidders should outline their expected budget expenditure in the proposal.

Payment terms shall be proposed by the bidder and discussed with GPSNR, in line with each Stage of the project.

6. Evaluation Factors

The proposal should include the following:

  1. A workplan that outlines all key activities in line with the stated Objectives and Deliverables
  2. Timeline and key stages of operations
  3. Budget, including detailed breakdown of expected manpower, logistics, and costs
  4. Description of past work and proof of technical expertise on natural rubber agroforestry systems is highly critical for this RFP
  5. A list of project team members with their roles in the project and associated qualifications

More To Explore

(Closed) Request For Proposal – GPSNR-RFP-A02-027-GPSNR Annual Report

Introduction & Background

At GPSNR, we bring together companies, smallholders, academia and civil society to transform the natural rubber supply chain into a sustainable, equitable and fair one.

Even though it was launched just in 2018, more than 50% of the world’s natural rubber demand already finds membership in GPSNR. This is only a small reflection of the amount of work that has taken place over the last three years.

We are seeking a web design consultancy to design, code and publish a webpage style annual report for 2022, which can be easily downloaded as a PDF version. The content for the webpage will be provided by the GPSNR secretariat.

Key Requirements 

 

Working closely with the GPSNR secretariat, the consultant will:

  • Create and finalise three web-page mockup (wireframes, prototypes, and corresponding user interface components like templates, stylesheets, scripts, images, etc) for the team to choose from.
  • Once the mock up has been chosen by the team, the consultant will include four rounds of feedback from the GPSNR secretariat and key stakeholders in the development of the final page.
  • Integrate components in the CMS to allow review and testing, and make corresponding adjustments based on feedback received.
    Liaise with GPSNR’s Communications Manager to ensure that the mockups are feasible for the GPSNR website.

Terms

The engagement will take place for a period of four weeks from 4 November to 9 November. Interim dates for wireframes and approvals will be mutually agreed upon after confirmation.

Necessary Competencies:

  • Solid understanding of the concepts of user experience, user interface design principles and conceptual design.
  • Expert knowledge in Wordpress CMS and Elementor
    Knowledge of Bootstrap, jQuery and AngularJS, HTML, and Elementor Shortcodes
    Knowledge of industry-standard design tools such as Adobe Photoshop, Illustrator and Dreamweaver.
  • Knowledge of Wordpress Content Management System, particularly with respect to page template design, will be considered an asset.
  • Eye for design and attention to detail are essential.

Submission Guidelines & Requirements

The following submission guidelines & requirements apply to this Request for Proposal:

  • Proposals will only be accepted from individuals or firms with experience relevant to this project.
  • Submissions must include 1) a portfolio of previous work 2) a paragraph describing how the consultant would approach such a project 3) a financial proposal with a breakdown of how much each competent of the work would cost.
  • Proposals must be signed by a representative that is authorized to commit to the bidder’s company.
  • Proposals must be received by 31 October 2022 to be considered.
  • Proposals should be submitted to bani.bains@gpsnr.org for consideration.

Project Timelines

Request for Proposal Issuance 20 October 2022
Proposal submitted by consultant to bani.bains@gpsnr.org 31 October 2022
Selection of consultant / Notification to Unsuccessful Bidders 2 November 2022
Completion of Phase 1: Preparatory Recommendations 4 November 2022
   

Budget

The Platform is anticipating a total budget of up to 4000 SGD for this project. 

Payment terms shall be:

  • 20% at the signing of the contract
  • 30% upon midpoint as mutually agreed
  • 50% at the completion of the project

Evaluation Factors

GPSNR will rate proposals based on the following factors:

  • Responsiveness to the requirements set forth in this Request for Proposals
  • Relevant past performance / experience and / or any samples of past work
  • Cost, including an assessment of total cost of ownership
  • Technical expertise/experience of bidder and the bidder’s staff

GPSNR reserves the right to award to the bidder that presents the best value to GPSNR as determined solely by GPSNR in its absolute discretion.

Request For Proposal – GPSNR-RFP-C03-036-Review and support the development of a Central Repository

Introduction & Background
The Global Platform for Sustainable Natural Rubber (GPSNR) is an international, multi-stakeholder, voluntary membership initiative seeking to lead improvements in the socioeconomic and environmental performance of the natural rubber value chain. Members of the platform include rubber products manufacturers, natural rubber suppliers and processors (PPTs), end users, smallholders, and civil society organisations. 

The Manufacturer’s Subgroup (SG) consists of GPSNR members who are rubber product manufacturers only.  Traditionally tracing each companies supply chain takes on an individualistic approach due to the sensitive nature of the data. However, to expedite the enhancement of traceability in view of EUDR, the SG has decided on a collaborative approach by developing a Central Repository. 

The Central Repository functions as a database for storing polygons and supply chain information contributed by individual members. It will also link the smallholders, PPTs and manufacturers on a single platform while reducing duplicated mapping efforts between different manufacturers. The Repository should allow for easy extraction of information for GPSNR’s Due Diligence System and be integrated with the EU information system. Moreover, the repository should either integrate different Risk, Traceability and Deforestation mapping tools or have the data formatted in a way that allows for seamless input into the tools. 

In addition, considering the sensitive nature of individual companies’ supply chain information, the platform must implement various layers of access control. This will ensure that each manufacturer can only access information pertaining to their own supply chain. Furthermore, the repository should have distinct tiers of users, including end users, manufacturers, PPTs, and smallholders, with each tier granted access privileges relevant to their role.

Objectives and Scope of Work/ Deliverables
GPSNR expects the consultant to deliver the following:

  1. Craft a database that stores polygon and supply chain information to the plantation level and allows for the upload of geo-mapping information. 
    1. The database should also have an online dashboard view of mapped / Mapping-in-progress farmlands, contract/seller invoice information – outstanding and shipped)

  2. The Central Repository should allow data to flow to and from or store data in a way that is compatible for the uses below:
    1. Traceability tool providers (Eg – Koltiva, TRST01, Harmuni (Agridence etc))
    2. Deforestation mapping tools (Eg – LiveEO, Satelligence, Starling etc)
    3. Risk assessment systems/tools (Eg – ASI Tool or Others as available etc)

  3. Create levels of access authorizations for different accounts within the platform – 
    1. User accounts for uploading geo mapped data
    2. Access to viewing the geo-mapped data linked to user accounts for the PPTs and Manufacturers
      1. Users should only have access to information from within their own supply chains or information that they input to the repository
      2. Users should be able to form links across different tiers. For example, users should be able to form links between smallholders and PPTs, PPTs and manufacturers. 
      3. When there are several members which require access to geo mapped data from one user, the platform should have the ability to extend access authorization to multiple users.
    3. Extracting information from Due Diligence Systems and integrating it with the EU Information System (this should be limited to manufacturers only)

  4. The platform should be compliant with applicable data privacy norms and regulations which include but are not limited to the GDPR and PDPA.

  5. A fee structure including management of shared cost arising from overlapping access to geo mapped data.

  6. Data protection and cyber security policies

  7. Service Level Agreements including downtime, maintenance, customer support and service, updates.

  8. Data Backup

  9. Server location – Singapore (Preferred)

  10. A timeline for development of the Central Repository (milestones with details)

  11. Optional – Deforestation monitoring tool integrated with central repository and the applicable fee structures

Proposal Format and Contents
The proposal should include the following:

  1. A workplan that outlines all key activities of the deliverables (as outlined in Expected Deliverables above)
  2. Timeline and key stages of operations (based on Project Timeline below) 
  3. Budget, including detailed breakdown of expected manpower, logistics, and costs 
  4. Description of past work and technical expertise that is relevant to this RFP
  5. A list of project team members with their roles in the project and associated qualifications.

Submission Guidelines & Requirements 
The following submission guidelines & requirements apply to this Request for Proposal: 

  1. Proposals will only be accepted from individuals or firms with experience relevant to this project. 
  2. Examples of previous relevant work should be provided as well. 
  3. A technical proposal must be provided that is not more than 4 pages. This technical proposal must provide an overview of the proposed solution as well as resumes of all key personnel performing the work. In addition, the technical proposal should provide a proposed schedule and milestones, as applicable. 
  4. A price proposal must be provided that is not more than 1 pages. This price proposal should indicate the overall fixed price for the project, a cost breakdown, and daily rates and an estimated total number of days. 
  5. Proposals must be signed by a representative that is authorized to commit bidder’s company. 
  6. Proposals should be submitted to stefano.savi@gpsnr.org and aidan@gpsnr.org for consideration. 
  7. GPSNR reserves the right to amend the scope and budget of this RFP in order to get the most suitable consultant for each topic. 

Project Timelines 

RFP Published

4 Sep 2023

Proposal Submission Deadline

25 Sep 2023

Contract Awarded

9 Oct 2023

First consultation with Manufacturer’s Subgroup 

23 Oct 2023

Bi-weekly progress updates

23 Oct – 18 Dec

Final Report + Deliverable submission

19 Dec 2023

Budget
The Platform will review budget proposals from service providers and the budget will comprise an important part of awarding the contract.

Payment terms shall be:

  • 20% at the signing of the contract
  • 30% at the midpoint date to be agreed upon and memorialized in the contract based on the submitted work plan
  • 40% on go-live 
  • Balance 10% – 1 month after go-live

Evaluation Factors
GPSNR will rate proposals based on the following factors, with cost being the most important factor:

  1. Responsiveness to the requirements set forth in this Request for Proposal
  2. Relevant past performance/ experience
  3. Samples of work
  4. Cost, including an assessment of total cost of ownership
  5. Technical expertise/experience of bidder and bidder’s staff

GPSNR reserves the right to award to the bidder that presents the best value to GPSNR as determined solely by GPSNR in its absolute discretion.


View RFP Document here

Scroll to Top