(CLOSED) Request for Proposal – GIS Database and Mapping Tools

Share This Post

Introduction & Background

The Global Platform for Sustainable Natural Rubber (GPSNR), is an international Multi-Stakeholder, voluntary membership initiative seeking to lead improvements in the socioeconomic and environmental performance of the natural rubber value chain. Development of the GPSNR was initiated by the CEOs of the World Business Council for Sustainable Development (WBCSD) Tire Industry Project (TIP) in November 2017. Members of the platform include tire manufacturers, rubber suppliers and processors, vehicle makers and NGOs.  Representatives from each of these stakeholder groups have contributed to the development of the Singapore-based platform and the wide-reaching set of priorities that will define GPSNR strategy and objectives.

The GPSNR has created three core working groups to help advance the platform’s mission to reduce social and environmental risks throughout the natural rubber supply chain.  Working Group 3 (WG3) is dedicated to Traceability and Transparency, with the objective to recommend tools to trace, assess the risk and achieve transparency of any given natural rubber product buyer’s supply chain.

To achieve the WG3 objective, we are requesting proposals for projects that will assess supply chain risks, achieve supply chain traceability and achieve supply chain transparency. 

GPSNR refers deforestation risk to loss of natural forests, HCV and HCSA areas. Currently each member is working independently on HCV/HCSA assessment and rather than doing it collectively. We understand that there have been several HCV maps developed by different organizations in several parts of the world, and our intention of this pilot is to find a collaboration with a partner to jointly upgrade/update the existing map. 

Note: Proposals for new mapping activities are not discouraged from applying.

Scope of Work and Objective

Comparison of Existing GIS Databases and Mapping Approaches of High-Risk Areas and Ongoing Threats

Compare existing and currently under-development GIS databases and mapping tools along with their mapping approaches through research and interviews of entities familiar with the production of such products. Additionally, where there is an absence or deficiency of tools, suggest the enhancement or combination of existing or creation of a new.

The study shall include but not be limited to the datasets, mapping approaches, GIS databases in development and/or adopted by:

(1) HCVRN;

(2) HCSA;

(3) UMD;

(4) UN Biodiversity Lab;

(5) WRI and;

(6) WWF.

The study shall:

  • Focus on countries/regions related to natural rubber production.
  • Provide an overview of each database/mapping tool that includes their general methodology.
  • Conduct a SWOT analysis of each tool to identify which tools are most suitable to detect high risk zones for the rubber sector based on presence of high carbon and/or biodiversity levels, High Carbon Stock values (HCSA), and/or High Conservation Values (HCVRN).
  • Suggest how existing traceability tools can (or cannot) interact with the GIS databases/mapping tool.

Submission Guidelines & Requirements

The following submission guidelines & requirements apply to this Request for Proposal:

  1. Proposals will only be accepted from individuals or firms with experience relevant to this project.
  2. A technical proposal must be provided that is not more than 4 pages. This technical proposal must provide an overview of the proposed tools for analysis as well as resumes of all key personnel performing the work. In addition, the technical proposal should provide a description of previous relevant work, and a proposed schedule.
  3. A price proposal must be provided that is not more than 1 pages. This price proposal should indicate the overall fixed price for the project as well as hourly rates and an estimated total number of days.
  4. Proposals must be signed by a representative that is authorized to commit bidder’s company.
  5. Proposals must be received prior to 19th August 2020 to be considered. Proposals should be submitted to stefano.savi@gpsnr.org for consideration.
  6. GPSNR anticipates shortlisting at least two individuals or firms to have more in-depth discussions with, and will make an award to one of these “down-selected” individuals or firms.

Budget

The Platform is anticipating that a total budget of no more than 20,000 Euros for the study. 

Payment terms shall be:

  • 50% at the signing of the contract
  • 50% on delivery of the final report

Evaluation Factors

GPSNR will rate proposals based on the following factors, with cost being the most important factor:

  1. Responsiveness to the requirements set forth in this Request for Proposal;
  2. Relevant past performance/experience;
  3. Samples of work;
  4. Cost, including an assessment of total cost of ownership;
  5. Technical expertise/experience of bidder and bidder’s staff;
  6. GPSNR reserves the right to award to the bidder that presents the best value to GPSNR as determined solely by GPSNR in its absolute discretion.

Please submit your application to stefano.savi@gpsnr.org by 19 August 2020.

More To Explore

(Closed) Request For Proposal – GPSNR-RFP-A02-024-Pilot Agroforestry Workshops for Smallholders

1. Introduction

The Global Platform for Sustainable Natural Rubber (GPSNR) is an international multi-stakeholder, voluntary membership initiative seeking to lead improvements in the socioeconomic and environmental performance of the natural rubber value chain. Members of the platform include tire manufacturers, rubber producers and processors, vehicle makers, NGOs, and smallholder natural rubber producers. 

As of June 2022, GPSNR has 135 smallholder members from 10 countries. Smallholder members on the Platform have consistently advocated for the Platform to implement initiatives on agroforestry and were a catalyst for GPSNR’s commitment on agroforestry announced at COP26 in Glasgow[1].

To advance engagement with smallholders on agroforestry, GPSNR is seeking to hire a consultant to develop coaching materials on rubber agroforestry systems, and to conduct a pilot series of “Introduction to Agroforestry” workshops for smallholders in two to three countries in 2022.

Proposed programmes should be implemented in line with GPSNR environmental and social commitments and values, based on the GPSNR Policy Framework[2].


[1] GPSNR Announcement on Agroforestry: https://t.co/9aXbZeZpeS
[2]GPSNR Policy Framework: https://sustainablenaturalrubber.org/policy-framework/

2. Objectives and Deliverables     

Objectives

  1. To collate and prepare global, country, and region-specific peer-reviewed evidence and best-practice materials on agroforestry for natural rubber systems
    1. Content on environmental, economic feasibility of rubber agroforestry systems
    2. Where feasible, collated material to be disseminated to GPSNR smallholder members and their communities even where workshops are not planned for in 2022 
    3. Materials would be translated by GPSNR under a separate budget
  2. To conduct pilot workshops for GPSNR smallholder members and their communities, including active integration of women, youth, and minority representation, to introduce agroforestry concepts and practices, and provide guidance and answers for the following questions:
    1. What is possible to grow in your region or specific location, and how can this be achieved? Possible considerations include:
      1. Appropriate farm design
      2. Cultivation practices
      3. Cost estimation
    2. What is the market availability, demand, and potential economic/financial model and value chain of recommended crops, or of particular products, in your region?
    3. How can agroforestry investments benefit smallholders economically, environmentally, and socially? 

Deliverables

GPSNR has identified the following countries where materials, and workshops, should be prioritised in 2022:

  1. Cambodia: strong enthusiasm from smallholders, NGOs, and other partners to organise and kickstart agroforestry in the country, where little to none have been implemented at present 
  2. Indonesia: agroforestry possibilities and practices would vary widely across the country’s major rubber-producing regions; there is strong interest from smallholders as well; critical to blend or merge more traditional concepts such as jungle rubber with evidenced-based and structured forms of agroforestry
  3. Thailand: a well-organised and budding agroforestry movement is taking root especially in southern Thailand (termed “sustainable natural rubber” by smallholders and the Rubber Authority of Thailand); workshops could further provide a boost to smallholders in the region and country
  4. Next tier of countries: Cote d’Ivoire, Vietnam, Sri Lanka, Myanmar 

The consultant may propose other priority countries in their proposal and justify their choice of countries based on metrics of their own construction.

The proposal should include key details such as the following:

  • Methodology of content and curriculum development
  • Proposed teaching or coaching pedagogy and approach for the workshops
  • List of local partners or experts, if any, that could be engaged for the workshops
  • Target number of smallholders in each country

Future Plans

In addition to the pilot series of workshops in 2022 in at least two countries, the consultant should present an outline to consider how the series of pilot “Introduction to Agroforestry Workshops” can be expanded (in terms of countries, content, level of engagement etc.) beyond 2022.

3. TENDER EVALUATION FACTORS

GPSNR will rate proposals based on the following factors:

  1. Responsiveness to the requirements set forth in this Request for Proposal
  2. Relevant past performance/experience/accreditation of the bidder on agroforestry and agricultural production
  3. Samples of work (e.g., previous training or coaching programmes in target countries)
  4. Technical expertise/experience of bidder and bidder’s staff
  5. Proposed timeline of operations

GPSNR reserves the right to award to the bidder that presents the best value to GPSNR as determined solely by GPSNR in its absolute discretion.

4. Expected Timelines

The work shall begin by July 2022 and the various phases shall be completed in accordance with the approximate timeline below:

Activity Due Date
RFP publication 3 June 2022
Submission deadline for proposals 1 July 2022
Contract Award 8 July 2022
First Workshops Conducted September 2022
Second Workshops Conducted October 2022
If Proposed: Third Workshops Conducted November 2022
Final Review and Project Conclusion December 2022

Consultants should detail a project timeline with milestones that are approximately in line with the above timeline.

Consultants will also provide fortnightly or monthly progress updates to the GPSNR Capacity Working Group, or on an as-needed basis.

5. Budget

The Platform is anticipating that the total budget of no more than 35,000 EUR be allocated to the project. The approximate expected breakdown for each Stage is as such:

Bidders should outline their expected budget expenditure in the proposal.

Payment terms shall be proposed by the bidder and discussed with GPSNR, in line with each Stage of the project.

6. Evaluation Factors

The proposal should include the following:

  1. A workplan that outlines all key activities in line with the stated Objectives and Deliverables
  2. Timeline and key stages of operations
  3. Budget, including detailed breakdown of expected manpower, logistics, and costs
  4. Description of past work and proof of technical expertise on natural rubber agroforestry systems is highly critical for this RFP
  5. A list of project team members with their roles in the project and associated qualifications

Tender

(Closed) Request for Proposal – GPSNR Capacity Building Working Group: Smallholders GAP Coaching in Indonesia (GPSNR-RFP-A02-017)

  1. INTRODUCTION

The Global Platform for Sustainable Naural Rubber is an international, multi-stakeholder, voluntary membership initiative committed to improving the socioeconomics and environmental performance of the natural rubber value chain.  Development of the GPSNR was intiated by the CEOs of the World Business Council for Sustainable Development (WBCSD) Tire Industry Project (TIP) in 2018.  Members of the platform include tire manufacturers, rubber suppliers and processors, vehicle makers and NGOs.  Representatives from each of these stakeholder groups have contributed to the development of the Singapore-based platform and the wide-reaching set of priorities that will define strategy and objectives.

The GPSNR aims to support the natural rubber sector to become more sustainable. Key element in achieving  this is to ensure there is capacity among smallholders and industrial plantations to adopt best practices in NR  production.

GPSNR, through the GPSNR Capacity Building Working Group (Indonesia National Subgroup), is seeking proposals to disseminate coaching materials and implement coaching on Good Agricultural Practices (GAPs) for smallholders in Indonesia.

Proposed coaching programmes should be implemented in line with GPSNR environmental and social commitments and values, based on the GPSNR Policy Framework[1].

  1. OBJECTIVES AND SCOPE OF WORK

2.1 Context

There are approximately 2.25M smallholders in Indonesia, representing 83% of national natural rubber production (3.6 M tonnes). Smallholders cultivate less than 2 ha of land with an average yield of slightly below 1 ton/ha, as compared to state and private commercial plantations achieving 1.4 ton/ha and 1.5 ton/ha respectively.

Indonesia’s average rubber yield is significantly lower than neighbouring countries in Southeast Asia; such low yield is due to low-quality clones, limited knowledge of Good Agricultural Practices (GAP) and aging trees.

Most rubber trees in Indonesia were planted from 1978-1991 through several government schemes. Given that rubber trees only have a 25-year productive lifespan, with steeply declining yields thereafter, almost all rubber trees planted under these schemes have passed their peak production. Whilst there is no formal data available on tree aging in Indonesia, the Ministry of Agriculture estimates around 600,000 – 700,000 ha of natural rubber plantations need rejuvenation. Replanting should ideally occur on about 4% of plantations annually to ensure a stable output. Yet, it is estimated that between 2010 and 2017 replanting of only 1.3% was undertaken.

Diseases are a major threat to rubber trees, with 80 – 90% of farmers experiencing tree diseases in 2019 in West Kalimantan and South Sumatra, and 60% in Jambi. When disease (pink and white root rot) attacks trees, the trees should be cut down, leaving not even the stem in the ground, to minimise infection of other trees. A new rubber leaf fall disease is spreading in Sumatra and Kalimantan. This disease causes leaf fall more than twice a year and reduces annual yield by up to 40%. The treatment for this disease is expensive and is often not implemented by smallholders.

Land preparation for replanting is also an important factor for sustainability of production and can lead to lower rubber disease infection rates. Young trees are susceptible to numerous diseases and pests, which smallholders must be coached and financially supported to protect in years 1 – 3. The cost of land preparation and field protection is among the most expensive investments, besides the purchase costs of high yielding clones. Costs incurred during the tree replanting stages is around $2,600 per ha over a 5-year period. During the 6th year, the trees will become productive and operational costs will be $460 pa.

Using the right clone makes a tremendous difference in a rubber tree’s lifetime yields. The productivity of rubber clonal and seedling-derived plants is almost 3 x lower than for certified clones. Across the region, only 5% of farmers received their seedlings through a government programme. Certified nurseries are only located in provincial and district capital cities resulting in limited access to high-yielding planting materials for remote smallholders.

Additionally, poor tapping techniques are another major cause of low yields and can decrease the productive life of trees by up to 50%. It is estimated that an average smallholder with 1.5 ha of rubber will earn 57% less than the Indonesian minimum wage.

Smallholders’ rubber plots and jungle rubber, as opposed to large, monoculture commercial estates, demonstrate higher animal diversity and may be able to come closer to mimicking the diversity found in natural forest ecosystems. Yet, low yields and record low international prices are driving smallholders to clear their jungle rubber and convert to other land uses such as palm oil. Research indicates in some villages on average, smallholders now grow rubber on only 0.34 ha with another 2.17 ha devoted to oil palm, and 66% of natural rubber plantations had been converted to oil palm. Cultivating oil palm also has other benefits such as i) being less labour intensive and generally farmers do not need to hire external labour – although gross returns of rubber are higher, the lower labour requirement for oil palm makes it more profitable for smallholders; ii) palm oil farmers receive more support from the government and supply chain actors; iii) contract farming arrangements for palm oil enables farmers to get loans/credits and extensions services from companies; and iv) the longer start up time for new rubber trees compared to oil palm is another factor as farmers receive income earlier than when planting rubber.

Five provinces contribute 66.5% of national production: South Sumatra, North Sumatra, Jambi, Riau, and West Kalimantan. South Sumatra province is Indonesia’s largest and most productive area. Its natural rubber area is almost 23% of the total national productive area and smallholders’ plantations take up 98.5% of this area. The productivity of smallholders in South Sumatra is the highest among smallholder areas in Indonesia, producing 1.3 ton/ha, and more likely to have received GAP training. In 2019 the government announced a replanting plan for 2019 – 2027, with a focus on South Sumatra (92,600 ha), South Kalimantan (76,550 ha) and Jambi (69,900 ha). However, this plan has no large-scale lending programme associated with it and is to be executed by local governments and has not yet been implemented. Demand for replanting is strongest in Jambi, where 40% of farmers are willing to undertake replanting. Demand is lowest in West Kalimantan, where only 1 farmer out of 79 was contemplating. Most likely the demand in Jambi is due to peak planting being undertaken in 1995 – 2005 and the majority of the trees are approaching their maximum productive age, and Jambi farmers are more aware of the importance of good quality clones and their impact on yield – they also have the highest rate of nursery clone purchase – and have suffered less from disease.

Source:

Financial Assessment of Smallholder Natural Rubber Production in Indonesia. July 2020. USAID Green Invest Asia, HeveaConnect, SNV and Financial Access. [2]

  1. EXPECTED DELIVERABLES

The overall objectives of the GAP coaching programmes are to ensure the long-term sustainability of rubber livelihoods and ecosystems by increasing smallholders’ productivity, yields, and socio-economic resilience, whilst safeguarding nature and the environment.

3.1 Brief Justifications

The proposal should implement GPSNR’s proposed strategy for capacity building in Indonesia and provide brief justifications on the most suitable approach to conduct coaching for smallholders in any of five identified regions:

  1. Northern Sumatra
  2. Southern Sumatra
  3. Central Sumatra
  4. West Kalimantan
  5. East Kalimantan

The GPSNR Capacity Building Working Group (Indonesia National Subgroup) may prioritise funding for coaching in regions based on relative productivity, coverage of existing coaching services, socio-economic needs, or other considerations.

3.2 Proposed Coaching Approach

Possible approaches for consideration include (non-exhaustive): mobile coaching at local community centres; building physical training centres; on-farm coaching; hybrid coaching approaches. The proposal should consider which approach represents the best fit for community needs and dynamics.

The proposed coaching approach should consider, but is not limited to, the following priorities:

  1. Coaching based on the train-the-trainers (ToT) model
  2. Female and other minority inclusion and represention
  3. Field coaching (or other approach) implementation plans
  4. Integration of technology for data capture and ongoing engagement, and progress tracking (i.e. immediate and longer-term monitoring and evaluation)
  5. Others i.e., nuanced approaches to meet geographic/other needs; ongoing farmer community connectivity and interactions; engagement with local or regional officials

Service providers are to adapt the provided GPSNR GAP coaching approaches. The GPSNR GAPs are created to serve as general best practices and principles for global usage and are periodically reviewed and updated to reflect the sector’s latest understandings. The service provider is expected to work with GPSNR to adapt the general GAPs to be in line with local situations in Indonesia in order to build trust with smallholders and to optimize coaching outcomes, especially in terms of language, technical specificities, and local needs.

The GPSNR GAPs consist of the following four modules:

  1. Rubber Plant Material
  2. Establishment and Maintenance of Plantations
  3. Latex Harvesting
  4. Diseases and Pests

Service providers are also expected to operate in line with principles and values set forth in the GPSNR Policy Framework[3] such as commitment to environmental protection and sustainability, zero deforestation, community engagement and FPIC etc.

The selected service providermay also be expected to work closely with the GPSNR Capacity Building Working Group (Indonesia National Subgroup) to fine-tuned or further augment the provided coaching materials.

3.3 Key Metrics

The proposal should elaborate on how the following key metrics can be achieved and measured:

  1. Total number of smallholders coached
  2. Total number of trainers or coaches coached
  3. Year-by-year increases in smallholder productivity and smallholders engaged
  4. Inclusitivity across gender, youth, geographic regions, and ethnicity (e.g., indigenous or other minority communities)
  5. Monitoring and evaluation of coaching progress and outcomes

Propoals are also encouraged to include key metrics of importance not listed above.

  1. PROPOSAL FORMAT AND CONTENTS

The proposal should include the following:

  1. A workplan that outlines all key activities of the deliverables (as outlined in Expected Deliverables above)
  2. Timeline and key stages of operations (based on Expected Timeline below)
  3. Budget, including detailed breakdown of expected manpower, logistics, and costs expected to run coaching programmes for an initial two years, beginning in 2022 (based on Budget below)
  4. Description of past work and technical expertise that is relevant to this RFP
  5. A list of project team members with their roles in the project and associated qualifications
  6. Proposals must be received prior to 15 January 2022 to be considered. Proposals should be submitted to yeo.siyuan@gpsnr.org for consideration. You may also reach out to this contact for any questions or clarifications
  1. EXPECTED TIMELINE

The work shall begin by February 2022 and the various phases shall be completed in accordance with the dates outlined in the timeline below:

Activity Due Date
RFP publication 10 Dec 2021
Submission deadline for proposals 15 Jan 2022
Evaluation and follow up End Jan 2022
Contract Award Feb 2022
Preparations and Implementation for 2022 Feb – Dec 2022
First Full Review Dec 2022
Preparations and Implementation for 2023 Jan – Dec 2023
Second Full Review Dec 2023

Consultants will also provide fortnightly or monthly progress updates to the GPSNR Capacity Working Group, or on an as-needed basis.

  1. BUDGET

The Platform is anticipating that the total budget of no more than 150,000 USD be allocated to the engagement, depending on the proposed coaching approach.

Payment terms shall be:

  • 30% at the signing of the contract
  • 20% at the first round of coaching conducted
  • 30% upon the First Full Review (Dec 2022)
  • 20% upon the Second Full Review (Dec 2023)
  1. EVALUATION FACTORS

GPSNR will rate proposals based on the following factors:

  1. Responsiveness to the requirements set forth in this Request for Proposal
  2. Relevant past performance/experience of the consultant
  3. Samples of work (e.g., previous training or coaching programmes in Indonesia)
  4. Cost per farmer, and other aspects of the proposed coaching approach or programme
  5. Technical expertise/experience of bidder and bidder’s staff
  6. Proposed timeline of operations
  7. Scale-up plan from 2022 to 2023, and outlook beyond 2023

GPSNR reserves the right to award to the bidder that presents the best value to GPSNR as determined solely by GPSNR in its absolute discretion.

[1] https://sustainablenaturalrubber.org/policy-framework/
[2] https://www.facsglobal.com/wp-content/uploads/2020/12/Final-Rubber-report-2020.pdf
[3] https://sustainablenaturalrubber.org/policy-framework/

Download RFP here
Contact Person: Yeo Siyuan  – yeo.siyuan@gpsnr.org

Scroll to Top