(CLOSED) Request for Proposal GPSNR REPORTING REQUIREMENTS (GPSNR-RFP-A02-013)

Share This Post

Introduction & Background

The Global Platform for Sustainable Natural Rubber (GPSNR), is an international, multi-Stakeholder, voluntary membership initiative seeking to lead improvements in the socioeconomic and environmental performance of the natural rubber value chain. Development of the GPSNR was initiated by the CEOs of the World Business Council for Sustainable Development (WBCSD) Tire Industry Project (TIP) in 2018. Members of the platform include tire manufacturers, rubber suppliers and processors, vehicle makers, smallholder rubber growers, and NGOs. Representatives from each of these stakeholder groups have contributed to the development of the Singapore-based platform and the wide-reaching set of priorities that will define GPSNR strategies and objectives.

Through a process led by the Policy Toolbox and Implementation Guidance Working Group (WG1), the General Assembly approved a Policy Framework in September 2020 that outlines the specific commitments to sustainable natural rubber that GPSNR company members must include in their public policies or other relevant documents.  GPSNR ordinary member companies are required to create new or update existing policies to align with the Policy Framework by March 2021 (companies will have a possibility to request an extension provided they can demonstrate progress in developing or updating their policies).  A process is currently underway to develop Implementation Guidance for companies to deliver on their commitments as outlined in the Policy Framework.  Reporting Requirements (RRs) are also to be developed as part of the GPSNR assurance model (currently in draft form).  The RRs will vary depending on where a member company sits within the natural rubber supply chain, so this work will be organized by the following stakeholder categories:  1) natural rubber producers, processors and traders (this stakeholder category will develop RRs for growers, traders of raw materials, processors, traders of processed material) 2) tire makers and other natural rubber product manufacturers; and 3) auto makers and other end users. 

GPSNR seeks a fixed-term consultancy to facilitate the development of the RRs per the stakeholder category.  In 2020, WG1 drafted Baseline Reporting Requirements (BRRs) that were intended to offer a framework for companies to evaluate where they were on their sustainability journey.   Following on feedback from the Executive Committee (EC) in early 2021, the WG decided that the BRRs, with specific modifications, could be converted to become the first year RRs.  A necessary next step is to align the BRRs with other global reporting schemes that members report into, such as ZSL Spott, Global Reporting Initiative (GRI), CDP Forests, and Ecovadis.  The consultant will identify where GPSNR requirements are similar and will align wherever possible.  The Consultant will also specify the connection between specific reporting metrics and specific components of the policy framework.  The Consultant will work with the appropriate focus groups to further incorporate member feedback into the design of the RRs for each stakeholder category.  The consultant will also coordinate with the consultant(s) hired to facilitate the development of the Implementation Guidance to ensure alignment among the Implementation Guidance and RRs.

Once the focus groups approve the RRs, they will go to the broader WG1 for approval, then on to the EC for review/approval, and the General Assembly will vote to adopt the RRs in September 2021.

The Engagement

The Consultant is to develop draft RRs based on the Policy Framework, GPSNR BRRs and Implementation Guidance and through the review of existing reporting schemes (e.g., ZSL Spott, CDP Forests, GRI, Ecovadis) in an effort to seek alignment.

The Consultant will facilitate engagement with specific focus groups and the broader WG1 to further develop the RRs for the following categories:

  • Growers
  • Traders of raw material
  • Processors
  • Traders of processed material
  • Tire makers and other rubber product manufacturers, and
  • Car makers and other end users.

Terms

  • The engagement shall begin 22 March 2021 and the deliverables shall be delivered in their final form no later than 15 June 2021
    • Interim dates for draft submission and review shall be developed and mutually agreed upon with the Secretariat and WG1 Co-chairs at the time of the engagement.
  • The Consultant shall review relevant GPSNR documents (e.g, Policy Framework, draft assurance model design, BRRs, etc.) and conduct a series of interviews with members and other stakeholders to fill any information gaps and to develop a strong understanding of the priorities and needs of the Natural Rubber Industry and Supply Chain members.  This shall, of course, include examination of the opinions and realities of the smallholder growers as well as larger entities.
  • The consultant should have deep understanding and documented experience in:
    • Understanding of sustainability reporting initiatives, particularly those for other deforestation-risk commodities
    • Understanding of the natural rubber industry or other similar forest commodities
    • Understanding of multi-stakeholder initiatives for sustainability
    • Understanding of antitrust regulations and its relevance vis a vis multi stakeholder initiatives
    • Group facilitation/consultation processes

Tasks

  • Review GPSNR Policy Framework, Baseline Reporting Requirements and key sustainability reporting schemes to inform development of Reporting Requirements for each of the six stakeholder categories.
  • Facilitate consultation processes with relevant stakeholder focus groups to further flesh out Reporting Requirements.
  • Regular contact and updating of both the broader Working Group and its Co-chairs and the Secretariat will be required.

Necessary Competencies

GPSNR will award a contract to a consultant based on:

  1. The applicant’s level of experience and proven depth of knowledge on relevant sustainability frameworks/reporting schemes
  2. Value for money
  3. The Secretariat’s and Working Group Co-chairs’ assessment of the viability of the consultant’s ability to complete the deliverables to a high standard.

Submission Guidelines & Requirements

The following submission guidelines & requirements apply to this Request for Proposal:

  1. Proposals will only be accepted from individuals or firms with experience relevant to this project.
  2. Examples of previous relevant work should be provided as well
  3. A technical proposal must be provided that is not more than 3 pages. This technical proposal must provide an overview of the proposed solution as well as resumes of all key personnel performing the work. In addition, the technical proposal should provide a proposed schedule and milestones, as applicable.
  4. A price proposal must be provided that is not more than 1 page. This price proposal should indicate the overall fixed price for the project as well as daily rates and an estimated total number of days.
  5. Proposals must be signed by a representative that is authorized to commit bidder’s company.
  6. Proposals must be received prior to 12 March 2021 to be considered. Proposals should be submitted to aidan@gpsnr.org and stefano.savi@gpsnr.org for consideration.
  7. GPSNR anticipates shortlisting at least two individuals or firms with which to have more in-depth discussions and will make an award to one of these short-listed individuals or firms.
  8. Applicants can obtain a copy of the BRRs by sending a request to aidan@gpsnr.org
  9. GPSNR reserves the right to amend the scope of this RFP in order to get the most suitable consultant.

RFP & Project Timelines

The Request for Proposal timeline is as follows:

Proposal submitted by consultant to GPSNR  12/03/2021
Selection of Top Bidders /
Notification to Unsuccessful Bidders  		19/03/2021
Contract Award /
Notification to Unsuccessful Bidders  		22/03/2021
Work to commence no later than29/03/2021
Need-date for project completion15/06/2021

Budget

The Platform is anticipating that a total budget of no more than 10,000 Singapore Dollars (SGD) be allocated to this engagement.    
Payment terms shall be:

  • 20% at the signing of the contract
  • 30% at the midpoint date to be agreed upon and memorialized in the contract based on the submitted work plan
  • 50% on delivery of the final report

Evaluation Factors

GPSNR will rate proposals based on the following factors:

  1. Responsiveness to the requirements set forth in this Request for Proposals
  2. Relevant past performance / experience and / or any samples of past work
  3. Cost, including an assessment of total cost of ownership.
  4. Technical expertise/experience of bidder and the bidder’s staff

GPSNR reserves the right to award to the bidder that presents the best value to GPSNR as determined solely by GPSNR in its absolute discretion.

GPSNR REPORTING REQUIREMENTS (GPSNR-RFP-A02-013)Download

More To Explore

Request For Proposal – GPSNR-RFP-A02-023-Pilot Provision of Certified Planting Materials in Indonesia – Assessing and Identifying Suitable Locations and Nursery Operators

Deadline for submission has been updated to 8th July 2022

1. Introduction

The Global Platform for Sustainable Naural Rubber is an international, multi-stakeholder, voluntary membership initiative committed to improving the socioeconomics and environmental performance of the natural rubber value chain.  Development of the GPSNR was intiated by the CEOs of the World Business Council for Sustainable Development (WBCSD) Tire Industry Project (TIP) in 2018.  Members of the platform include tire manufacturers, rubber suppliers and processors, vehicle makers and NGOs.  Representatives from each of these stakeholder groups have contributed to the development of the Singapore-based platform and the wide-reaching set of priorities that will define strategy and objectives.

The GPSNR aims to support the natural rubber sector to become more sustainable. Key element in achieving  this is to ensure there is capacity among smallholders and industrial plantations to adopt best practices in NR  production. 

GPSNR, through the GPSNR Capacity Building Working Group (Indonesia National Subgroup), is seeking hire a consultant to assess and recommend suitable locations and nursery operators to receive certified planting materials (to be delivered by GPSNR).

Certified planting materials will be distributed to the selected service provider in January 2023, for planting and distribution to smallholders by September 2023.

Proposed programmes should be implemented in line with GPSNR environmental and social commitments and values, based on the GPSNR Policy Framework1.

1https://sustainablenaturalrubber.org/policy-framework/

2. Objectives and Scope of Work     

There are approximately 2.25M smallholders in Indonesia, representing 83% of national natural rubber production (3.6 M tonnes). Smallholders cultivate less than 2 ha of land with an average yield of slightly below 1 ton/ha, as compared to state and private commercial plantations achieving 1.4 ton/ha and 1.5 ton/ha respectively. 

Indonesia’s average rubber yield is significantly lower than neighbouring countries in Southeast Asia; such low yield is due to low-quality clones, limited knowledge of Good Agricultural Practices (GAP) and aging trees.

Most rubber trees in Indonesia were planted from 1978-1991 through several government schemes. Given that rubber trees only have a 25-year productive lifespan, with steeply declining yields thereafter, almost all rubber trees planted under these schemes have passed their peak production. Whilst there is no formal data available on tree aging in Indonesia, the Ministry of Agriculture estimates around 600,000 – 700,000 ha of natural rubber plantations need rejuvenation. Replanting should ideally occur on about 4% of plantations annually to ensure a stable output. Yet, it is estimated that between 2010 and 2017 replanting of only 1.3% was undertaken. 

Using the right clone makes a tremendous difference in a rubber tree’s lifetime yields. The productivity of rubber clonal and seedling-derived plants is almost 3 x lower than for certified clones. Across the region, only 5% of farmers received their seedlings through a government programme. Certified nurseries are only located in provincial and district capital cities resulting in limited access to high-yielding planting materials for remote smallholders.

Additionally, poor tapping techniques are another major cause of low yields and can decrease the productive life of trees by up to 50%. It is estimated that an average smallholder with 1.5 ha of rubber will earn 57% less than the Indonesian minimum wage.  

Five provinces contribute 66.5% of national production: South Sumatra, North Sumatra, Jambi, Riau, and West Kalimantan. South Sumatra province is Indonesia’s largest and most productive area. Its natural rubber area is almost 23% of the total national productive area and smallholders’ plantations take up 98.5% of this area. The productivity of smallholders in South Sumatra is the highest among smallholder areas in Indonesia, producing 1.3 ton/ha, and more likely to have received GAP training. In 2019 the government announced a replanting plan for 2019 – 2027, with a focus on South Sumatra (92,600 ha), South Kalimantan (76,550 ha) and Jambi (69,900 ha). However, this plan has no large-scale lending programme associated with it and is to be executed by local governments and has not yet been implemented. Demand for replanting is strongest in Jambi, where 40% of farmers are willing to undertake replanting. Demand is lowest in West Kalimantan, where only 1 farmer out of 79 was contemplating. Most likely the demand in Jambi is due to peak planting being undertaken in 1995 – 2005 and the majority of the trees are approaching their maximum productive age, and Jambi farmers are more aware of the importance of good quality clones and their impact on yield – they also have the highest rate of nursery clone purchase – and have suffered less from disease. 

Source:
Financial Assessment of Smallholder Natural Rubber Production in Indonesia. July 2020. USAID Green Invest Asia, HeveaConnect, SNV and Financial Access.2

2https://www.facsglobal.com/wp-content/uploads/2020/12/Final-Rubber-report-2020.pdf

3. Expected Deliverables

The consultant should assess and make recommendations on the following:

Location

Provide detailed rationales for where certified planting materials are most needed amongst the following regions:

  1. Northern Sumatra
  2. Southern Sumatra
  3. Central Sumatra
  4. West Kalimantan
  5. East Kalimantan

Based on the consultant’s assessments, the GPSNR Capacity Building Working Group (Indonesia National Subgroup) may prioritise funding for specific regions based on relative productivity, coverage of existing coaching services, socio-economic needs, or other considerations.

Nursery Operators

Assess detailed business models of existing nursery operators and projects that outline the long-term environmental, financial, operational and social sustainability of the proposed budwood garden under their management. This should include, but is not limited to, the following:

  1. Operational, staff, and maintenance costs of the budwood garden
  2. Method of distribution of planting materials to smallholders
  3. Selling price of planting materials to smallholders, e.g., Recommended Retail Price (RRP)
  4. Other key business plan considerations

Based on the consultant’s recommendations and decision by the GPSNR Capacity Building Working Group, the identified nursery operator will be expected to enter into a Contractual Agreement with GPSNR to ensure geographic and financial accessibility for smallholders to receive the planting materials.

Logistics

The consultant should manage logistics such as the safe transportation of the clonal materials from the source (to be determined by GPSNR) to identified nursery operators

Technical Training and Verification

The consultant should work closely with the identified nursery operator to ensure that the clonal materials are correctly managed. This includes the following:

  1. Conducting essential training and supervision on the grafting process for the identified operators
  2. Supervision to ensure proper grating procedures is adhered to
  3. Manage the necessary technical verification, i.e., validation of the quality of the established budwood garden

All of the consultant’s activities are to operate in line with principles and values set forth in the GPSNR Policy Framework3 such as commitment to environmental protection and sustainability, zero deforestation, community engagement and FPIC etc.

The consultant may also be expected to work closely with the GPSNR Capacity Building Working Group (Indonesia National Subgroup) to fine-tuned or further augment the clone selection and delivery timelines.

Key Metrics

The proposal should elaborate on how the following key metrics can be achieved and measured:

  1. Methodology to identify suitable locations and nursery operators
  2. Methodology to conduct technical training and supervision on the grafting process
  3. Methodology on transportation and other logistics
  4. Overall expected costs

Proposals are also encouraged to include key metrics of importance not listed above.

3https://sustainablenaturalrubber.org/policy-framework/

4. Proposal Format and Contents

The proposal should include the following:

  1. A workplan that outlines all key activities of the deliverables (as outlined in 3. Expected Deliverables above)
  2. Timeline and key stages of operations (based on 5. Expected Timeline below)
  3. Budget, including detailed breakdown of expected manpower, logistics, and costs (based on 6. Budget below)
  4. Description of past work and technical expertise that is relevant to this RFP
  5. A list of project team members with their roles in the project and associated qualifications

5. Expected Timelines

The work shall begin by July 2022 and the various phases shall be completed in accordance with the approximate timeline below:

RFP publication 3 June 2022
Submission deadline for proposals 8 July 2022
Contract Award 1 July 2022
First Full Review October 2022
Delivery of clones January 2023
Second Full Review April 2023
Distribution of planting materials to smallholders September 2023

Consultants will also provide fortnightly or monthly progress updates to the GPSNR Capacity Working Group, or on an as-needed basis.

6. Budget

The Platform is anticipating that the total budget of no more than 26,000 EUR be allocated to the Four Stages of the project. The approximate expected breakdown for each Stage is as such:

Payment terms shall be:

  • 30% at the signing of the contract
  • 20% upon the First Full Review
  • 20% upon the Second Full Review
  • 30% upon the delivery of planting materials

7. Evaluation Factors

GPSNR will rate proposals based on the following factors:

  1. Responsiveness to the requirements set forth in this Request for Proposal
  2. Relevant past performance/experience of the consultant
  3. Samples of work (e.g., previous training or coaching programmes in Indonesia)
  4. Technical expertise/experience of bidder and bidder’s staff
  5. Proposed timeline of operations

GPSNR reserves the right to award to the bidder that presents the best value to GPSNR as determined solely by GPSNR in its absolute discretion.

View RFP Document here

GPSNR Secretariat June 3, 2022
Tender

(CLOSED) Request for Proposal – Study on Living Income Gap in Global Natural Rubber Value Chains – Myanmar

Introduction & Background

The Global Platform for Sustainable Natural Rubber (GPSNR), is an international Multi-Stakeholder, voluntary membership initiative seeking to lead improvements in the socioeconomic and environmental performance of the natural rubber value chain. Development of the GPSNR was initiated by the CEOs of the World Business Council for Sustainable Development (WBCSD) Tire Industry Project (TIP) in November 2017. Members of the platform include tire manufacturers, rubber suppliers and processors, vehicle makers and NGOs.  Representatives from each of these stakeholder groups have contributed to the development of the Singapore-based platform and the wide-reaching set of priorities that will define GPSNR strategy and objectives.

Through a process led by the Equity Working Group, the Platform has begun an investigation into how value can be equitably distributed across the entire natural rubber value chain. To achieve this aim, it is important for the Platform to gather information about the following metrics in different countries:

i) the prevailing net household income of rubber smallholders;

ii) the detailed cost of production for rubber (input costs, labor etc);

iii) the living income for rubber smallholders;

iv) the living income gap and v) the living income reference price for rubber (the price at which the living income benchmark can be reached).

The Platform has decided to limit the focus of this initial study to Ivory Coast, Indonesia, Thailand, and Myanmar and the consultant is expected to collect information on the aforementioned metrics in Myanmar for this study.

Given that living income data is not readily available for each country, alternative benchmarks should be used where relevant and applicable. A list of potential benchmarks and preliminary data are illustrated in the attached document. To facilitate cross-country comparisons of income data and living income levels, the consultant is expected to use consistent units of measurement (per household / per workforce / per person) throughout this study.

The consultant will collect the information via desktop study, interviewing of GPSNR members, research institutes, social NGOs, governmental organizations, etc.  A primary list of stakeholders will be provided by the Secretariat together with the Equity Working Group members.  A complementary list will be developed by the consultant.  Regular contact and updating to the Equity Working Group together with the Secretariat will be required. Travel plans shall be made by the consultant where possible and necessary.

Submission Guidelines & Requirements

The following submission guidelines & requirements apply to this Request for Proposal:

  1. Proposals will only be accepted from individuals or firms with experience relevant to this project.
  2. Examples of previous relevant work should be provided as well.
  3. A technical proposal must be provided that is not more than 4 pages. This technical proposal must provide an overview of the proposed solution as well as resumes of all key personnel performing the work. In addition, the technical proposal should provide a proposed schedule and milestones, as applicable.
  4. A price proposal must be provided that is not more than 1 pages. This price proposal should indicate the overall fixed price for the project as well as hourly rates and an estimated total number of days.
  5. Proposals must be signed by a representative that is authorized to commit bidder’s company.
  6. Proposals must be received prior to 19th August 2020 to be considered. Proposals should be submitted to stefano.savi@gpsnr.org for consideration.
  7. GPSNR anticipates shortlisting at least two individuals or firms to have more in-depth discussions with, and will make an award to one of these “down-selected” individuals or firms.

Budget

The Platform is anticipating that a total budget of no more than 10,500 Euros be allocated to this engagement

Payment terms shall be:

  • 50% at the signing of the contract
  • 50% on delivery of the final report

Evaluation Factors

GPSNR will rate proposals based on the following factors, with cost being the most important factor:

  • Responsiveness to the requirements set forth in this Request for Proposal;
  • Relevant past performance/experience;
  • Samples of work;
  • Cost, including an assessment of total cost of ownership;
  • Technical expertise/experience of bidder and bidder’s staff;
  • The ability to collect information at the global and local level.

GPSNR reserves the right to award to the bidder that presents the best value to GPSNR as determined solely by GPSNR in its absolute discretion.

Please submit your application to stefano.savi@gpsnr.org by 19 August 2020.

GPSNR Staff August 14, 2020

© 2022 All rights reserved

Global Platform for Sustainable Natural Rubber

Scroll to Top