(CLOSED) Request for Proposal – GPSNR Compliance Panel Guidance (GPSNR-RFP-A02-014)

Share This Post

INTRODUCTION AND BACKGROUND

The Global Platform for Sustainable Natural Rubber is an international, multi-stakeholder, voluntary membership initiative committed to improving the socioeconomics and environmental performance of the natural rubber value chain.  Development of the GPSNR was initiated by the CEOs of the World Business Council for Sustainable Development (WBCSD) Tire Industry Project (TIP) in 2018.  Members of the platform include tire manufacturers, rubber suppliers and processors, vehicle makers and NGOs.  Representatives from each of these stakeholder groups have contributed to the development of the Singapore-based platform and the wide-reaching set of priorities that will define strategy and objectives.

The GPSNR Statutes mandate the creation of an independent Compliance Panel to review and ensure that Members meet GPSNR membership requirements in conformance with Statutes, Code of Conduct, decisions, standards and processes, and make recommendations to GPSNR Executive Committee. The Compliance Panel will administer decisions in line with relevant GPSNR procedures. The panel shall be composed of three external experts and will operate independently from the membership and Secretariat.

GPSNR is seeking a consultant to help define procedures and guidelines required for the transparent and impartial operations and activities of GPSNR Compliance Panel.

PHASE I: OBJECTIVES AND SCOPE OF WORK

Objectives: To review GPSNR Statutes and relevant procedures, and develop recommendations and propose options available for the structure, operations and verification protocols of the Compliance Panel. 

The current GPSNR membership statutes document stipulates the following: 

10. Compliance System and Compliance Panel. The Executive Committee shall establish a Compliance System to ensure that Members meet Platform membership requirements in conformance with the Platform’s Statutes, Code of Conduct, decisions, standards and processes. The operating procedures of the Compliance System shall be defined in terms of reference to be adopted by the Executive Committee, consistent with the following core provisions: 

a. The Compliance System shall be administered by the Secretariat. 

b. Recommendations and decisions under the Compliance System shall be made by a Compliance Panel. 

c. The Compliance Panel’s functions shall include the review of whether a Member (in the period after its admission) meets the requirements for membership. 

d. The Compliance Panel shall operate independently from the Executive Committee and General Assembly. 

e. The Compliance Panel shall be composed of an independent body of three external experts that meet on a regular basis. 

f. Experts shall be nominated by an Ordinary Member and elected by a decision of the General Assembly to serve a 3-year term. 

g. A Member of the Compliance Panel may be removed by a consensus decision of the Executive Committee with a clear justification available to members upon request. 

h. Members of the Compliance Panel shall be subject to a conflict of interest policy, as adopted by the Executive Committee. 

i. The Compliance System shall ensure that Members are afforded an opportunity to be heard and an opportunity to cure any findings of non-compliance, alleged by either the Compliance System or Grievance Mechanism. 

The consultant is expected to provide an outline of relevant existing compliance models, a comparison of options that GPSNR could consider, and justified recommendations based on: 

  • Review of other existing membership and/or compliance panel models  
  • Review of GPSNR Statutes and other relevant GPSNR documents  
  • Interviews with GPSNR members and relevant external stakeholders 
  • Other relevant expert advice and guidance 

Scope of Work:

GPSNR is seeking a consultant to recommend operational procedures and guidance for the GPSNR Compliance Panel, to include: 

  • Proposed roles and responsibilities of GPSNR Compliance Panel 
  • Suggested scope of the CP’s activities 
  • Recommended qualification requirements and selection protocols for Compliance Panel members; covering necessary relevant expertise, how to avoid conflict of interests, and procedures for the appointment and removal of Panel members  
  • Options for the structure of decision-making within the panel 
  • Proposed verification procedures by the panel to assess ongoing compliance of GPSNR members with membership requirements 
  • Procedure for issuing appropriate recommendations to ensure compliance of GPSNR members, based on the submitted results of the verification process.  
  • Options for GPSNR to deal with situations where members cannot demonstrate compliance with relevant membership requirements, including steps towards potential suspension or termination in cases of major or persistent noncompliance 
  • Suggestions for appeal procedures related to the decisions/recommendations of the GPSNR CP 
  • Procedure for recording and reporting of Compliance Panel decisions/recommendations  

PROPOSAL FORMAT AND CONTENTS

  • Description of past work that is relevant to this RFP. 
  • A workplan that outlines all key activities of the pilot study, cost for each and timeline for completion. 
  • A description of deliverables and indication of accessibility to GPSNR members and/or the public.  
  • A list of project team members with their roles in the project and associated qualifications. 

TERMS

The work shall begin by 21 May 2021 and the various phases shall be completed in accordance with the dates outlined in the timeline below: 

Activity Due Date 
Submission deadline for proposals 7 May 2021 
Contract Award 14 May 2021 
Work begins By 21 May 2021 
Presentation of first draft to GPSNR Policy Toolbox WG (WG1) 2 June 2021 (adjustable) 
Review of draft based on WG1 feedback 3-10 June 2021 
Submission of final recommendations  11 June 2021 

BUDGET

The Platform is anticipating that the total budget of no more than 10,000 SGD be allocated to the engagement. 

Payment terms shall be: 

  • 20% at the signing of the contract 
  • 30% at the presentation of the first draft 
  • 50% upon delivery of the final recommendations. 

EVALUATION FACTORS

GPSNR will rate proposals based on the following factors, with cost being the most important factor: 

  1. Responsiveness to the requirements set forth in this Request for Proposal; 
  2. Relevant past performance/experience; 
  3. Samples of work; 
  4. Cost, including an assessment of total cost of ownership; 
  5. Technical expertise/experience of bidder and bidder’s staff. 

GPSNR reserves the right to award to the bidder that presents the best value to GPSNR as determined solely by GPSNR in its absolute discretion. 

Proposals should be submitted to stefano.savi@gpsnr.org and aidan@gpsnr.org for consideration.

More To Explore
Tender

(CLOSED) Request for Proposal – Study on Living Income Gap in Global Natural Rubber Value Chains – Myanmar

Introduction & Background

The Global Platform for Sustainable Natural Rubber (GPSNR), is an international Multi-Stakeholder, voluntary membership initiative seeking to lead improvements in the socioeconomic and environmental performance of the natural rubber value chain. Development of the GPSNR was initiated by the CEOs of the World Business Council for Sustainable Development (WBCSD) Tire Industry Project (TIP) in November 2017. Members of the platform include tire manufacturers, rubber suppliers and processors, vehicle makers and NGOs.  Representatives from each of these stakeholder groups have contributed to the development of the Singapore-based platform and the wide-reaching set of priorities that will define GPSNR strategy and objectives.

Through a process led by the Equity Working Group, the Platform has begun an investigation into how value can be equitably distributed across the entire natural rubber value chain. To achieve this aim, it is important for the Platform to gather information about the following metrics in different countries:

i) the prevailing net household income of rubber smallholders;

ii) the detailed cost of production for rubber (input costs, labor etc);

iii) the living income for rubber smallholders;

iv) the living income gap and v) the living income reference price for rubber (the price at which the living income benchmark can be reached).

The Platform has decided to limit the focus of this initial study to Ivory Coast, Indonesia, Thailand, and Myanmar and the consultant is expected to collect information on the aforementioned metrics in Myanmar for this study.

Given that living income data is not readily available for each country, alternative benchmarks should be used where relevant and applicable. A list of potential benchmarks and preliminary data are illustrated in the attached document. To facilitate cross-country comparisons of income data and living income levels, the consultant is expected to use consistent units of measurement (per household / per workforce / per person) throughout this study.

The consultant will collect the information via desktop study, interviewing of GPSNR members, research institutes, social NGOs, governmental organizations, etc.  A primary list of stakeholders will be provided by the Secretariat together with the Equity Working Group members.  A complementary list will be developed by the consultant.  Regular contact and updating to the Equity Working Group together with the Secretariat will be required. Travel plans shall be made by the consultant where possible and necessary.

Submission Guidelines & Requirements

The following submission guidelines & requirements apply to this Request for Proposal:

  1. Proposals will only be accepted from individuals or firms with experience relevant to this project.
  2. Examples of previous relevant work should be provided as well.
  3. A technical proposal must be provided that is not more than 4 pages. This technical proposal must provide an overview of the proposed solution as well as resumes of all key personnel performing the work. In addition, the technical proposal should provide a proposed schedule and milestones, as applicable.
  4. A price proposal must be provided that is not more than 1 pages. This price proposal should indicate the overall fixed price for the project as well as hourly rates and an estimated total number of days.
  5. Proposals must be signed by a representative that is authorized to commit bidder’s company.
  6. Proposals must be received prior to 19th August 2020 to be considered. Proposals should be submitted to stefano.savi@gpsnr.org for consideration.
  7. GPSNR anticipates shortlisting at least two individuals or firms to have more in-depth discussions with, and will make an award to one of these “down-selected” individuals or firms.

Budget

The Platform is anticipating that a total budget of no more than 10,500 Euros be allocated to this engagement

Payment terms shall be:

  • 50% at the signing of the contract
  • 50% on delivery of the final report

Evaluation Factors

GPSNR will rate proposals based on the following factors, with cost being the most important factor:

  • Responsiveness to the requirements set forth in this Request for Proposal;
  • Relevant past performance/experience;
  • Samples of work;
  • Cost, including an assessment of total cost of ownership;
  • Technical expertise/experience of bidder and bidder’s staff;
  • The ability to collect information at the global and local level.

GPSNR reserves the right to award to the bidder that presents the best value to GPSNR as determined solely by GPSNR in its absolute discretion.

Please submit your application to stefano.savi@gpsnr.org by 19 August 2020.

GPSNR Staff August 14, 2020

(CLOSED) Request for Proposal – Study on Human Rights and Labour Rights’ risk mapping in the global Natural Rubber value chains

Through a process led by the Strategy and Objectives Working Group the Platform has developed stated goals with a strong focus on developing a framework that supports and sustains responsible supply chain . Important among the information needed to undergo these developments of is a better understanding of the social risks including (but not limiting to) Human Rights and Labour Rights in the Natural Rubber value chains, globally.

Each country has its own governance and social structure which contributes to different social risks from country to country. While these risks are associated to the wider population, there are specific characteristics of social risks that are particularly associated to agricultural production. For the countries where law enforcement is weak, there is a risk that the workers are exposed to poor work conditions without any access to a fair complaint mechanism.

Although the initial focus of this project is on human rights and labour rights (including migrant workers), the consultant is expected to elaborate how human and labour rights are associated to other social risks (i.e. land acquisition, community health, safety and security, etc.) in order to recommend risk mitigation methods to the Strategy and Objectives Working Group.

The consultant is expected to develop generic risk profile at a global level, and specific risk profile at a regional level. The tentative regions for specific risks study are proposed as following:

  • – Production Unit and Rubber Block Processing Unit- Southeast Asia (Thailand, Indonesia, Vietnam), Africa (Cote d’Ivoire, Ghana) and Latin America (Brazil, Guatemala);
  • – Tyre Manufacturing Unit – China, Southeast Asia, Europe and US.

The list of regions above is tentative and can be adjusted upon the discussion between the consultant and the Strategy and Objectives Working Group members. After the risk profiles are developed, the consultant is expected to come up with recommendations for risk mitigation strategies for each region.

The consultant will collect the information via desktop study, interviewing of GPSNR members, research institutes, social NGOs, governmental organizations, etc. A primary list of stakeholders will be provided by the Secretariat together with the Strategy and Objectives Working Group members. A complementary list will be developed by the consultant. Regular contact and updating to the Strategy and Objective Working Group together with the Secretariat will be required. It is estimated that there will be the need for a series of face to face meetings in South East Asia over the course of the project. Travel plans shall be made by the consultant

The following submission guidelines & requirements apply to this Request for Proposal:

  1. Proposals will only be accepted from individuals or firms with experience relevant to this project.
  2. Examples of previous relevant work should be provided as well.
  3. A technical proposal must be provided that is not more than 4 pages. This technical proposal must provide an overview of the proposed solution as well as resumes of all key personnel performing the work. In addition, the technical proposal should provide a proposed schedule and milestones, as applicable.
  4. A price proposal must be provided that is not more than 1 pages. This price proposal should indicate the overall fixed price for the project as well as hourly rates and an estimated total number of days.
  5. Proposals must be signed by a representative that is authorized to commit bidder’s company.
  6. Proposals must be received prior to 10th January 2020 to be considered. Proposals should be submitted to stefano.savi@gpsnr.org for consideration.
  7. GPSNR anticipates shortlisting at least two individuals or firms to have more in-depth discussions with, and will make an award to one of these “down-selected” individuals or firms

Download full Request for Proposal here

GPSNR Staff December 3, 2019

© 2022 All rights reserved

Global Platform for Sustainable Natural Rubber

Scroll to Top