Strategy and Objectives Working Group: Following the approval of the Assurance Model resolution (5b), the Assurance Model Task Force is working with ASI in developing the Assurance Model including aligning with current normative documents, engaging members for consultation, and pilot testing.
In parallel, the Risk Subgroup hosted a webinar focused on traceability and shared findings from their traceability pilot projects.
The Risk subgroup has decided to temporarily pause its activities until December, allowing time for ASI to complete the Assurance Model alignment. ASI has commenced its task of aligning key GPSNR documents. These documents aim to lay a solid foundation for the complete Assurance Model. Upon the completion of this alignment process, the fully drafted Assurance Model will be presented to the members for consideration and approval.
Smallholders Representation and Capacity Building (SCB) Working Group: The Indonesian subgroup presented their quarterly reports for two GAP Coaching projects and one Disease Fighting project on October 27, 2023. In addition, GPSNR secured a joint collaboration letter with RAOT and invited all member companies to participate in the Thailand GAP coaching project in Bueng Kan and Chiang Rai provinces. The Thailand agroforestry project also received additional funding for further sub-projects.
The Digital Knowledge Sharing Platform (KSP) task force conducted a pilot user acceptance test and initiated socialisation sessions and training for smallholder farmers in Indonesia. They also announced a Request for Proposal (RFP) for KSP’s third phase, focusing on content development, with submissions due by November 24, 2023.
Rubber agroforestry workshops were held in Côte d’Ivoire from October 25-27, 2023, and information on capacity-building projects open for funding was shared with all members. The SCB WG will continue to oversee all ongoing projects, with efforts to plan logistics for smallholder representatives attending events in Thailand and France. The Thailand agroforestry subgroup is working on a supplemental agreement for additional projects.
Members interested in the Thailand GAP project in Chiang Rai and Bueng Kan are encouraged to contact cheewei@gpsnr.org for more information. The KSP task force plans to continue socialisation sessions and training in Indonesia and Thailand, aiming for the final user acceptance test by the end of November 2023. By the end of November, the task force will begin evaluating proposals for KSP’s third phase.
The Income Diversification and Rubber Agroforestry task force is preparing for its second Indonesian agroforestry workshop of 2023, scheduled for November 22-24. Additionally, a webinar is planned for November 30, 2023, to present findings from the HCSA-HCVN field trial.
Policy Toolbox Working Group: On November 22nd, WG1 met to discuss the quantification of the RR, data aggregation methodologies, and updates relating to the RR in the context of the Assurance Model. During the meeting, operational timelines and survey to gather information were set up.
Currently, Agridence is developing the digital platform, and the Secretariat plans to provide updates on the RR to ensure the platform is operational before the 2024 reporting cycle.
WG1 is also working on revising the Code of Conduct to include non-conformance measures for failing to update the Reporting Requirements, in line with the non-conformance measures approved by the Executive Committee in 2022.
Lastly, following the approval of the revised reporting requirements, the WG will proceed to develop the disclosure requirements for the Year 3 reporting cycle.
Shared Responsibility Working Group: The Assurance Model will be meeting with ASI to provide feedback on the proposed Assurance Model under development. Additionally, the Working Group has an open co-chair seat and is calling for volunteers to fill this position.
At GPSNR, we bring together companies, smallholders, academia and civil society to transform the natural rubber supply chain into a sustainable, equitable and fair one.
Even though it was launched just in 2018, more than 50% of the world’s natural rubber demand already finds membership in GPSNR. This is only a small reflection of the amount of work that has taken place over the last five years.
Scope
We are seeking a web design consultancy to design, code and publish a webpage style annual report for 2023, which can be easily downloaded as a PDF version. The content for the webpage will be provided by the GPSNR secretariat.
Core tasks
Working closely with the GPSNR secretariat, the consultant will:
Create and finalise three web-page mockup (wireframes, prototypes, and corresponding user interface components like templates, stylesheets, scripts, images, etc) for the team to choose from.
Once the mock up has been chosen by the team, the consultant will include four rounds of feedback from the GPSNR secretariat and key stakeholders in the development of the final page.
Integrate components in the CMS to allow review and testing, and make corresponding adjustments based on feedback received.
Liaise with GPSNR’s Communications Manager to ensure that the mockups are feasible for the GPSNR website.
Terms
The engagement will take place for a period of four weeks from 11 December to 8 January. Interim dates for wireframes and approvals will be mutually agreed upon after confirmation.
Necessary Competencies:
Solid understanding of the concepts of user experience, user interface design principles and conceptual design.
Expert knowledge in Wordpress CMS and Elementor.
Knowledge of Bootstrap, jQuery and AngularJS, HTML, and Elementor Shortcodes.
Knowledge of industry-standard design tools such as Adobe Photoshop, Illustrator and Dreamweaver.
Knowledge of Wordpress Content Management System, particularly with respect to page template design, will be considered an asset.
Eye for design and attention to detail are essential.
Submission Guidelines:
The following submission guidelines & requirements apply to this Request for Proposal:
Proposals will only be accepted from individuals or firms with experience relevant to this project.
Submissions must include 1) a portfolio of previous work 2) a paragraph describing how the consultant would approach such a project 3) a financial proposal with a breakdown of how much each competent of the work would cost.
Proposals must be signed by a representative that is authorized to commit to the bidder’s company.
Proposals must be received by 1 December 2023 to be considered. Proposals should be submitted to bani.bains@gpsnr.org for consideration.
To receive a copy of the draft content, applicants can email bani.bains@gpsnr.org
RFP and Project Timelines
Submission of Proposal
1/12/2023
Selection of top bidders and further conversations
4/12/2023
Contract award/notification to unsuccessful bidders
7/12/2023
Work commences no later than
11/12/2023
Budget
The Platform is anticipating a total budget of up to 4000 Singapore Dollars (SGD) be allocated to this engagement.
Payment terms shall be:
20% at the signing of the contract
30% upon midpoint as mutually agreed
50% at the completion of the project
Evaluation Factors
GPSNR will rate proposals based on the following factors:
Responsiveness to the requirements set forth in this Request for Proposals
Relevant past performance / experience and / or any samples of past work
Cost, including an assessment of total cost of ownership
Technical expertise/experience of bidder and the bidder’s staff
GPSNR reserves the right to award to the bidder that presents the best value to GPSNR as determined solely by GPSNR in its absolute discretion.
The Global Platform for Sustainable Natural Rubber (GPSNR) is an international multi-stakeholder, voluntary membership initiative seeking to lead improvements in the socioeconomic and environmental performance of the natural rubber value chain. Development of GPSNR was initiated by the CEOs of the World Business Council for Sustainable Development (WBCSD) Tire Industry Project (TIP) in 2019. Members of the platform include tire manufacturers, rubber suppliers and processors, vehicle makers and NGOs. Representatives from each of these stakeholder groups have contributed to the development of the Singapore-based platform and the wide-reaching set of priorities that define GPSNR strategy and objectives.
In 2021, GPSNR’s Capacity Building Working Group has identified that a digital knowledge sharing platform (KSP) is crucial to GPSNR’s future operations. The GPSNR Secretariat and the GPSNR Capacity Building Working Group, through the GPSNR Knowledge Sharing Platform Task Force, are jointly overseeing the development and eventual operations and maintenance of a digital GPSNR Knowledge Sharing Platform called Rubber Wiki.
Rubber Wiki will serve as a centralized digital hub, enabling smallholder rubber producers worldwide to access to technical information on relevant global news, latest sustainability best practices and Good Agricultural Practices, daily natural rubber prices, weather forecast and recommended activities, communication features and others. It will also facilitate peer-to-peer exchange of best practices, working conditions, and experiences, fostering coordination and collaboration within the global natural rubber production community.
GPSNR successfully completed the initial phase of the project, which involved conducting a comprehensive assessment of existing digital tools and evaluating the digital capabilities and needs of smallholder rubber producers. Currently, GPSNR is in the midst of the second phase, focusing on the development of multi-lingual mobile application features for the KSP. The second phase is expected to be completed in mid-December 2023.
To fully realize the Rubber Wiki’s potential, GPSNR is now seeking proposals to strengthen the critical third phase, which centers on content development for Rubber Wiki.
This is a crucial phase as it will enable the KSP to achieve its core objectives by facilitating effective knowledge exchange and collaboration among smallholder rubber producers worldwide. Through the development of high-quality and tailored content, GPSNR aims to address the specific challenges and requirements faced by smallholders.
To ensure the content’s relevance and effectiveness, interested bidders should undertake comprehensive adaptations for the contents that take into consideration of both the global nature of the industry and the unique contexts of smallholder rubber producers in different regions.
Objectives
1. Inventory & Develop Materials/Modules Conduct a comprehensive inventory of content related to GAP, disease fighting, agroforestry, tapping qualities, etc., addressing smallholders’ challenges. Ensure that this content aligns with GPSNR’s values and guidelines. Incorporate resources from members/partners and develop new content if there’s no suitable materials available (subject to discussion and approval by the KSP Task Force) to cater to specific and diverse needs of smallholders.
2. Consistency & Adaptability To ensure all materials/modules are consistent and adaptable across regions. Bridge regional requirements through research and suitable content, style, and languages for effective knowledge sharing.
3. Ownership & Compliance Secure rightful ownership of acquired/developed content, duly registered with GPSNR. Address copyright/licensing concerns for content protection.
4. Integration & User-Friendly Evaluate materials/modules for seamless integration into the KSP platform. Implement adaptations (formatting, language localization, and technical optimization) for easy access and navigation.
5. Functional Implementation Ensure operational efficiency and functionality of the KSP platform, encouraging active user engagement in knowledge sharing.
Activities Required
The proposed studies/activities required for Phase 3 – Content Development for the KSP are as follows:
1. Identify, Adapt and Develop Materials/Modules
– Conduct a comprehensive inventory of existing materials/modules related to Good Agricultural Practices (GAP), disease fighting, agroforestry, tapping qualities, and other relevant topics specifically tailored for smallholder natural rubber producers. The determination of relevant topics will involve discussions with the KSP Task Force to ensure alignment with the specific needs and challenges faced by smallholders in the natural rubber production sector.
– Identify and collaborate with members or partner organizations to access relevant content resources and incorporate them into the KSP.
– Conduct research and develop new content materials/modules to fill identified gaps and cater to the specific challenges faced by smallholders in different regions.
– Evaluate the identified content materials/modules for consistency across different regions to ensure alignment with local regulations, best practices, and specific challenges faced by smallholder rubber producers in each respective region.
– Implement strategies to ensure that content is consistent and adaptable to the local context.
– Determine and incorporate the necessary adaptations, such as adapting the materials’ content to comply with local requirements, formatting, language localization, and more.
2. Testing & Adjustment / Quality Control Conducting acceptance testing and review of the modules/materials to ensure accuracy, reliability, and adherence to industry best practices. This includes verifying information, checking for inconsistencies or errors and engaging subject matter experts for peer review. Necessary adjustments should be made based on feedback and evaluation to ensure high-quality and user-friendly content.
3. Ownership Rights and Copyright Compliance
– Ensure all content materials/modules acquired or developed are rightfully obtained, and their ownership is registered with GPSNR.
– Address any copyright or licensing concerns to secure the intellectual property rights of the content.
4. Integration and Implementation
– Evaluate and adapt the identified content materials for seamless integration into the KSP platform.
– Implement, test, and make necessary adaptations, such as formatting, language localization, and technical optimization, to ensure easy user access to the developed contents.
5. Monitoring, Evaluation, and Continuous Improvement Monitor platform usage, evaluate its effectiveness, and continuously update and enhance the platform based on feedback and evaluation.
6. Progress reporting Provide a brief summary of the activities undertaken during the reporting period.
The proposed durations for each activities stated above are:
Expected Deliverables
Identify, Adapt and Develop Materials/Modules
a. Development of a minimum of 50 materials/modules covering:
i. Proposed topics of Materials/Modules:
1) Good Agricultural Practices (GAP)
2) Disease Fighting
3) Agroforestry
4) Tapping Qualities
5) Improving yields through approved rubber clones
6) Others relevant topics addressing specific challenges faced by smallholders (subject to discussion and approval by the KSP Task Force)
ii. Regional Coverage: Indonesia, Thailand, Côte d’Ivoire, Malaysia, Cambodia, Vietnam, Sri Lanka, Myanmar, Liberia, India, Brazil, Ghana
iii. Languages: Bahasa Indonesia, English, Thai, French, Khmer, Bahasa Malaysia, Vietnam, Sinhalese, Burmese, Spanish, Portuguese, Tamil
iv. Format: text-based materials, audio-visual contents (such as movies, videos, animations, cartoons, infographics) and other suitable formats.
Creation of a guidance document for users and a content inventory system for content managers, providing detailed information on modules/materials and relevant content resources.
Testing & Adjustment / Quality Control
Submission of a quality control report on the developed modules/materials, inclusive of language localization and formatting testing to ensure adaptability for different regions.
Implement feedback mechanisms allowing users to provide input on the content’s usefulness and effectiveness.
Ownership Rights and Copyright Compliance
● Provide copyright/licensing documents demonstrating the rightful acquisition or development of materials/modules and registration of intellectual property rights with GPSNR.
Integration and Implementation
● Demonstration of the complete integration and implementation of developed modules/materials into the KSP, ensuring accessibility and usability within the platform.
Monitoring, Evaluation, and Continuous Improvement
● Collection and submit report on of data on user interactions, time spent on modules, user feedback, and other relevant usage statistics, along with lessons learned or findings.
Progress Reporting
● Submission of a mid-term report containing project summary, key milestones, module/materials development summary, quality control details, intellectual property rights information, challenges and recommendations.
● The final report and presentation will document the project’s process and outcomes, providing a roadmap for future Knowledge Sharing Platform enhancements.
Submission Guidelines & Requirements
The following submission guidelines & requirements apply to this Request for Proposal:
Proposals will only be accepted from individuals or firms with experience relevant to this project. Examples of previous relevant work should be provided, as well as resumes of all key personnel performing the work. We welcome joint-organizations to submit proposals for this RFP.
A detailed technical proposal must be provided. The technical proposal should include, but is not limited to, the following:
● A workplan that outlines proposed methodology to carry out all key activities stated above. Interested bidders are welcome to propose additional activities that are deemed important in ensuring successful executive of this project.
● Key outputs align with the expected deliverables stated above.
● Timeline and key operational stages.
● Price proposal (budget), detailing an overall fixed price and a breakdown of expected costs for manpower, logistics, and other project-related expenses.
● Description of past work and technical expertise that is relevant to this RFP.
● A list of project team members with their roles in the project and associated qualifications.
Proposals must be signed by a representative that is authorised to commit the bidder’s company.
Proposals must be received prior to the 24th November 2023 to be considered. Proposals should be submitted to cheewei@gpsnr.org for consideration.
GPSNR reserves the right to amend the scope and budget of this RFP in order to get the most suitable consultant for each topic.
Project Timelines
RFP publication
8 November 2023
Submission deadline for proposals
24 November 2023
Evaluation of proposals and follow up
24 November – 7 December 2023
Contract Award and Notification to Unsuccessful Bidders
8 December 2023
Proposed Project commencement date
15 December 2023
Mid-term review
March 2024
Final review
August 2024
The above timeline is open to further adjustments based on discussions with the interested bidder(s) and GPSNR’s ongoing key milestones.
Budget
The Platform is anticipating that a total budget of no more than 80,000 EUR be allocated to this RFP.
The proposed payment terms are as follows:
● 20% at the signing of the contract
● 30% at the Mid-term Review (the date will be agreed upon and documented in the contract)
● 50% on Final Review
These payment terms are subject to further adjustments based on discussions with the interested bidder(s) and the project timeline.
Evaluation Factors
GPSNR will rate proposals based on the following factors, with cost being the most important factor:
1. Responsiveness to the requirements set forth in this Request for Proposal
2. Relevant past performance/ experience
3. Samples of work
4. Proposed price/budget
5. Technical expertise/experience of bidder and bidder’s staff
6. Proposed timeline
When evaluating bids, GPSNR may request for more information as part of a full due diligence to understand bidders’ technical and commercial background, assess potential conflicts of interests and independence vis-à-vis natural rubber smallholders and the wider agricultural sector, and level of competence for the project.
GPSNR reserves the right to award to the bidder that presents the best value to GPSNR as determined solely by GPSNR in its absolute discretion.
We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept”, you consent to the use of ALL the cookies. However you may visit Cookie Settings to provide a controlled consent.
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. These cookies ensure basic functionalities and security features of the website, anonymously.
Cookie
Duration
Description
cookielawinfo-checkbox-advertisement
1 year
Set by the GDPR Cookie Consent plugin, this cookie is used to record the user consent for the cookies in the "Advertisement" category .
cookielawinfo-checkbox-analytics
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional
11 months
The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
PHPSESSID
session
This cookie is native to PHP applications. The cookie is used to store and identify a users' unique session ID for the purpose of managing user session on the website. The cookie is a session cookies and is deleted when all the browser windows are closed.
viewed_cookie_policy
11 months
The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.
Functional cookies help to perform certain functionalities like sharing the content of the website on social media platforms, collect feedbacks, and other third-party features.
Performance cookies are used to understand and analyze the key performance indexes of the website which helps in delivering a better user experience for the visitors.
Cookie
Duration
Description
ac_enable_tracking
1 month
This cookie is set by Active Campaign to denote that traffic is enabled for the website.
Analytical cookies are used to understand how visitors interact with the website. These cookies help provide information on metrics the number of visitors, bounce rate, traffic source, etc.
Cookie
Duration
Description
_ga
2 years
The _ga cookie, installed by Google Analytics, calculates visitor, session and campaign data and also keeps track of site usage for the site's analytics report. The cookie stores information anonymously and assigns a randomly generated number to recognize unique visitors.
_gat_gtag_UA_139883466_1
1 minute
Set by Google to distinguish users.
_gid
1 day
Installed by Google Analytics, _gid cookie stores information on how visitors use a website, while also creating an analytics report of the website's performance. Some of the data that are collected include the number of visitors, their source, and the pages they visit anonymously.
CONSENT
2 years
YouTube sets this cookie via embedded youtube-videos and registers anonymous statistical data.
Advertisement cookies are used to provide visitors with relevant ads and marketing campaigns. These cookies track visitors across websites and collect information to provide customized ads.
Cookie
Duration
Description
NID
6 months
NID cookie, set by Google, is used for advertising purposes; to limit the number of times the user sees an ad, to mute unwanted ads, and to measure the effectiveness of ads.
VISITOR_INFO1_LIVE
5 months 27 days
A cookie set by YouTube to measure bandwidth that determines whether the user gets the new or old player interface.
YSC
session
YSC cookie is set by Youtube and is used to track the views of embedded videos on Youtube pages.